Accu-Chek Active 360 View

Accurate and fast results the easy way 

• Auto-coding: Inserting just a chip makes testing simple right from the start
• Very easy and user-friendly handling: A large display, simple handling with just two buttons and the possibility of out-of-meter dosing
• Accurate and fast results: The meter requires no more than 5 seconds to measure and delivers results that correlate with a lab test in an excellent way¹
• Under-dose detection: The meter signals the application of too little blood to the test strip
• Strip expiry warning: If you are measuring with an expired strip, the Accu-Chek Active meter alerts you and marks the value accordingly
• Visual double check: With the test strip itself you can quickly compare the test result to ensure correct measurement

• Measuring principle: Photometric determination of glucose by means of glucose-dye-oxidoreductase.  (synonym: PQQ-dependent glucose dehydrogenase mediator reaction)
• Measuring time:
  • Approx. 5 sec (blood application with test strip within the meter)
  • Approx. 10 sec (blood application with test strip outside the meter)
• Measuring conditions: Temperature: +10°C to +40°C (+50°F to +104°F)
• Humidity: up to 85 % relative humidity
• Storage conditions:
  • Without battery: -25°C to +70°C (-13°F to +158°F)
  • With battery: -10°C to +50°C (+14°F to +122°F)
• Humidity: up to 93 % relative humidity
• Memory capacity: Up to 350 measurements with date and time
• Test averages: 7, 14, 30 days
• Data transfer: Via infrared interface (wireless)
• Dimensions: 104 x 52 x 21 mm
• Weight: 53 g without battery
• Battery: CR 2032
• Batterylife: Approx. 1000 measurements in one year
• Auto power off: 30 or 90 seconds according to operating status
• Display: 7 segment LCD with symbols
• Under-dosing detection: Yes
• Altitude independence: 0 – 4000m (0 – 13123 feet)
• Blood volume: 1 - 2 μL
• Measuring range: 10 mg/dl – 600 mg/dl or 0.6 mmol/L – 33.3 mmol/L

Measuring

Take a test strip from the vial and close it immediately. The meter turns on automatically, after inserting the test strip into the test  strip guide in the direction of the arrows.

After a short display check and code number confirmation (it should correspond with the code on the vial), the test strip and flashing blood drop symbols appear on the display. Apply drop of blood to center orange field and remove finger. Obtain results after 5 seconds.

The meter turns off automatically by removing the test strip from it. The result is stored in the memory with date and time.

Out-of-meter dosing

When test strip and flashing blood drop symbols are displayed, remove test strip from meter. Apply blood to test strip and reinsert it into the meter within approx. 20 seconds.

Visual plausibility check of test results

Check round colored control window on the back of the test strip.

Compare the color of this window with colored dots on label of test strip vial for plausibility check. But consider: Only test results displayed by the meter should be used for therapeutic decisions.

For more information on how to use your meter, please see your Accu-Chek Active Owner’s Booklet.

• Accu-Chek Active test strips
• Accu-Chek Active control solutions
• Accu-Chek Softclix lancing device or Accu-Chek Multiclix lancing device
• Carry-case (soft pouch)
• User’s manual
• Pocket testing guide
• Battery(CR 2032)
• Accu-Chek 360 °
• Accu-Chek Smart Pix
• Accu-Chek Smart Printer
• Accu-Chek Pocket Compass